Ranked #2 of 8 3D printers
Bambu Lab P2S Review (2026)
X1C-level prints without the X1C price.
Prices and specs verified September 2026. How we rate products.
The P2S launched in November 2025 as the successor to the P1S/P1P, and it landed with a clear message: everything the X1C does that matters, for hundreds less. The headline upgrade is the DynaSense servo extruder, which owners report meaningfully reduces jams and improves consistency on tricky filaments like CF-PLA and TPU. The 30-second quick-swap hotend makes nozzle maintenance nearly painless.
The fully enclosed chamber is what separates the P2S from cheaper rivals at this price: ABS, ASA, and nylon print reliably without a DIY enclosure project. Pair it with the AMS 2 Pro in the $749 Combo and you get four-color printing plus active filament drying — genuinely useful if you print moisture-sensitive materials.
The trade-offs are philosophical as much as practical. The firmware is closed, there is no Klipper access, and the full experience assumes a Bambu cloud account. Multicolor printing still purges filament into waste, it is audible at speed, and there is no Ethernet port. None of that stops it from being the default recommendation for most buyers — but open-source devotees should look at Prusa instead.
Pros & cons
Pros
- Print quality rivaling the X1C for much less money, per owner comparisons
- DynaSense servo extruder: fewer jams, better consistency on CF-PLA and TPU
- Fully enclosed — ABS, ASA, and nylon-capable at $549
- AMS 2 Pro adds active filament drying while printing
- Best-in-class software: Bambu Studio, Handy app, MakerWorld, Farm Manager
- TechRadar 300-hour endurance test: consistent accuracy, no layer shifts
Cons
- Closed firmware — no Klipper access, real ecosystem lock-in
- Multicolor purging still wastes filament
- Audible at speed (~65 dB reviewer-measured); no Ethernet port
- Heat creep reported in hot rooms; belt tension loss after 100+ hours
Key specs
- Build volume
- 256 × 256 × 256 mm
- Max speed
- 600 mm/s
- Motion
- CoreXY, fully enclosed
- Multicolor
- AMS 2 Pro (Combo) — 4 colors + active drying
- Nozzle
- 0.4 mm hardened steel, 300 °C max
- Bed
- Textured PEI spring steel, auto leveling
- Noise
- ~65 dB (reviewer-measured)
- Connectivity
- Wi-Fi, Bluetooth, USB (no Ethernet)
Who it is for
Best for
- Serious hobbyists
- ABS/ASA printing
- Print farms
Not for
- Tinkerers who want open firmware
- Silent-room printing
- Anyone avoiding cloud accounts
Frequently asked questions
Is the Bambu Lab P2S worth it over the older P1S?
Yes for most buyers. The servo extruder, quieter operation, better camera, and quick-swap hotend are meaningful upgrades, and the P1S exists now mainly as the discounted older sibling.
Can the P2S print ABS and ASA?
Yes — the enclosed chamber (around 50 °C passive) handles ABS and ASA well. For exotic high-temp materials, printers with actively heated chambers like the Creality K2 Pro go further.
Does the P2S work without the cloud?
Basic printing works over LAN, but the full feature set — including the Handy app and MakerWorld integration — assumes a Bambu account. This is the ecosystem lock-in critics cite.